Skip to main content

Rust+ says the Smart Switch is on. Why is the light off?

On in Rust+ describes the Smart Switch state. Check what power reaches the switch and what leaves it before pairing again or changing the rest of the circuit.

Check one switch and one visible load

Try a single in-game light you can see from the switch. Have a player with building privilege operate it in person. Use the Wire Tool to follow the source into the switch's Power In and its Power Out to the light. Switch On and Switch Off change the switch state. The circuit still needs power at Power In.

Check one switch and one visible load
What happens with the lightWhat to check
It works when you use the switch in person and in the appThe switch and its remote control work. Check the wiring or power needs of the original load.
It stays dark even when you use the switch in personCheck the source, the power sockets and the light's required power.
It works in person, but the physical switch never changes from the appCheck the paired device name against the exact switch. Have someone watch it while you change it from the app.

Carry one working check back to the real circuit

Suppose the app controls the workshop switch, but adding a second light left the room dark. Check power in and out with the simpler circuit first. Put the original wiring back and read the power where the lights share it. Verify the light follows both an On and an Off from the app after the change.

Sources

Analytics settings

Analytics are off.

Help improve RustSC with page counts and performance measurements. Privacy details