
Why won't your Rust CCTV station show a base camera?
Check power at both the CCTV station and the camera. If you can open the station and only one feed fails, compare that camera's identifier to the one saved at the station.
Separate a station problem from a camera problem
Current Rust builds require power at the CCTV station. Use the Wire Tool to check the station's feed as well as the camera's input. If another camera already works at the same station, focus on the missing feed and the power reaching that camera.
Match the saved identifier to the camera in the world
Equip a hammer and use the installed camera's menu to check its identifier. Add that exact identifier at the station and select it. Keep camera identifiers private to the people who should see the feeds.
- Use a camera aimed at a known spot, such as your garage entrance. Ask a teammate to stand there and verify the live feed shows them.
- If the wrong area appears, check the selected camera and its direction. Use the camera menu to set the direction if needed.
- If a feed fails only after dark, check the power again at that time. A midday check can miss a circuit that runs directly from solar power.